Contact Us
Call Us
Customer Service (Morocco)
Customer Service (International)
Monday to Friday 8am-5:30pm (UTC)
Compactors 816
Request a QuoteKey Information
Net Power (SAE J1995:2014)
212 kW
Net power (SAE J1349:2011)
186 kW
Net power (ISO 9249:2007)
186 kW
Overview
To Help You Crush
Specially designed for use in sanitary landfills, the Cat 816 offers features, performance, and efficiency that come from over 45 years of industry leadership. Proven field protection and integrated technologies ensure high availability and optimal performance in sanitary landfills.
Benefits Enhanced Protection
Designed to protect key components and systems from damage, debris, chemicals, premature wear, or materials that may cover the components.
Up to 12% Reduction in Maintenance Costs
Maintenance points grouped together for easy maintenance.
Improved Driver Comfort
Modernized cabin equipped with quiet steering, a new seat, and adjustable controls that allow drivers to work more efficiently throughout the day.
Key Features
- Mastering and Driving Comfort
- Top-notch Service and Assistance
- Power and Efficiency
- Boosted Productivity by Technologies
- Wheel Tips Designed to be Performant
Mastering and Driving Comfort
Simplified entry and exit thanks to a completely redesigned cabin with a foldable armrest. Drivers kept informed of the condition and operation of the machine thanks to the VIMS™ 3G machine monitoring system. Improved safety and visibility thanks to the standard rear vision camera. Automatic temperature control allows for the preservation of selected temperature settings. Driver productivity improved with new membrane contactor panels, key ignition, and electrohydraulic parking brake switch. Increased comfort through reduced noise levels in the driver's compartment. Reduced noise levels outside and low noise level sets available as an option.
Top-notch Service and Assistance
Simplified access, in a controlled environment, electronic compartment located inside the cabin. Emphasis on safety with access to main components at ground level or via a platform. At ground level: emergency stop, battery cut-off and engine starter. Quick visual control and reduction of liquid contamination thanks to level gauges for coolant, transmission oil and hydraulic oil. Electronic air intake clogging indicator. Designed to facilitate maintenance and inspections. - Hydraulic oil cooler, fuel cooler and condenser grouped together - Centralized lubrication points Thanks to the Vital Information Management System (VIMS), drivers and technicians can solve problems before they even occur.
Power and Efficiency
Reliable performance, longevity, and low emissions. High productivity and fuel efficiency. Two available engines compliant with US EPA Tier 4 Final and European Stage V emissions standards or equivalent to US EPA Tier 3 and European Stage IIIA standards. For the Tier 4 Final and Stage V option, the Cat Clean Emissions Module contains a diesel oxidation catalyst, a diesel particulate filter, and a Cat regeneration system using SCR technology. Regeneration is fully automatic and does not interrupt the machine's work cycle. Benefit from optimal responsiveness and control with the integrated direction and transmission control system (STIC™). Save even more fuel with automatic electrical circuit and engine shutdown. Get an extra boost on slopes and save fuel by using this boost during gear shifts with the all-new APEC transmission controls. Drivers are less fatigued with the throttle lock that maintains engine speed.
Boosted Productivity by Technologies
The COMPACT technologies use advanced compaction measurement features, cabin guidance, and reporting production to help you achieve your compaction goals as quickly and uniformly as possible, with a lower number of passes. - 3D mapping system available as an option The Link technology (standard) allows you to know the location of the machines, their number of operating hours, fuel consumption, downtime, events that occurred, as well as diagnostic codes through the VisionLink® online interface.
Wheel Tips Designed to be Performant
Specifically designed to fit Cat machines. Improves machine performance with increased service life and traction maintenance. Three wheel and tip configurations are available to fit each of your applications: 1) Pallet Tip: high performance and fuel savings thanks to greater traction capacity and reduced weight. 2) Plus Tip: traditional design for better lateral stability on slopes. 3) Combined Tip: wheels equipped with both types of tips (Pallet and Plus) offer the best compromise between exceptional performance, reduced fuel consumption, and lateral stability on slopes.
Contact Our Experts
Morocco
International
Monday to Friday 8am-5:30pm (UTC)
Product Specifications for 816
- ENGINE
- Gross Power (SAE J1995:2014)212 kW
- Net Power (SAE J1349:2011)186 kW
- Engine ModelC7.1 Cat
- EmissionsCompliant with U.S. EPA Tier 4 Final, European Stage V, Japanese 2014, and Korean Tier 4 Final emissions standards.
- Rated Speed2200 RPM
- Maximum Torque - 1400 RPM1223 Nm
- Torque Rise52%
- Bore105 mm
- Stroke135 mm
- Displacement7.01 l
- Engine ModelC7.1 Cat
- EmissionsMAR-1 standard in Brazil and Stage III standard for non-road engines in China or equivalent Tier 3/Stage IIIA European standards.
- Rated Speed2200 RPM
- Net Power (SAE J1349:2011)186 kW
- Maximum Torque - 1400 RPM1016 Nm
- Torque Rise26%
- Bore105 mm
- Stroke135 mm
- Operating Weight26052 kg
- Displacement7.01 l
- Operating Weight25760 kg
- Cooling System Capacity - Tier 4 Final (USA)/Stage V (EU)81 l
- Hydraulic System - Equipment/Steering175 l
- Service BrakesSingle disc, oil-cooled, inboard-mounted, 2-wheel
- Machine Sound Level (ISO 6395)111 dB(A)
- Machine Sound Level (ISO 6395)109 dB(A)
- Machine Sound Level (ISO 6395)112 dB(A)
- Dimensions
- Height to Top of Air Conditioning Condenser4161 mm
- Height to Top of Rear Compactor Canopy2499 mm
- Ground Clearance to Articulation Joint519 mm
- Ground Clearance to Bottom of Bumper818 mm
- Rear Axle Midpoint to Rear Compactor Canopy2614 mm
- Width Over Front Scrapers3000 mm
- Width Over Rear Scrapers3036 mm
- Width Over Drum Housing3140 mm
- Width Over Drums3338 mm
- Overall Machine Length with Straight Blade7806 mm
- Cutting Blade Height990 mm
- Inside Turning Radius - Cutting Edge2910 mm
- Tips Combined (assembly weight)6148 kg
- Biter Tips (assembly weight)5733 kg
- Outside Diameter1717 mm
- Drum Diameter1400 mm
- Drum Width1016 mm
- Pads per Track5
- Pads per Wheel20
- ReplaceableWelded
- Width Over Drums3338 mm
- Tip Diameter159 mm
- ENGINE - TIER 4 FINAL/STAGE V (EU) COMPLIANT
- Net Power (ISO 9249:2007)186 kW
- Engine Power (ISO 14396:2002)205 kW
- Maximum Rated RPM2270 RPM
- Idle Speed800 RPM
- Maximum Altitude without Derating3000 m
- Note*Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, emission components, and alternator.
- ENGINE - BRAZIL MAR-1 STANDARD AND STAGE III FOR NON-ROAD ENGINES IN CHINA, EQUIVALENT TO TIER 3/STAGE IIIA (EU)
- Gross Power (SAE J1995:2014)213 kW
- Engine Power (ISO 14396:2002)205 kW
- Maximum Rated RPM2270 RPM
- Idle Speed800 RPM
- Maximum Altitude without Derating3000 m
- Note*Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, emission components, and alternator.
- TRANSMISSION
- Transmission TypeCat Planetary Powershift
- Forward Speeds - 1st6.7 km/h
- Forward Speeds - 2nd12 km/h
- Reverse Speeds - 1st7.7 km/h
- Reverse Speeds - 2nd12 km/h
- HYDRAULIC SYSTEM - LIFT/COMPACTOR
- Lift/Compactor Circuit: Valve TypeLoad-sensing pilot valve with electrohydraulic control
- Lift/Compactor Circuit: Pump TypeVariable displacement piston
- Maximum Flow at 2200 RPM89 l/min
- Relief Valve Setting - Lift/Compactor22000 kPa
- Pilot CircuitOpen center, fixed displacement gear
- Pilot Relief Valve Setting21000 kPa
- HYDRAULIC SYSTEM: STEERING
- Steering Circuit: Valve TypePilot operated with load sensing
- Steering Circuit: Pump TypePiston, variable displacement
- Maximum Flow at 2200 RPM147 l/min
- Relief Valve Setting - Steering27600 kPa
- Total Steering Angle84
- Steering Cycle Time - Full Left to Full Right - High Idle3 s
- Steering Cycle Time - Full Left to Full Right - Low Idle8.2 s
- SERVICE REFILL CAPACITIES
- Fuel Tank500 l
- Transmission56 l
- MAINTENANCE CAPACITIES
- Diesel Exhaust Fluid Tank*16 l
- Cooling System - Tier 3/Stage IIIA Equivalent73 l
- Engine Crankcase20 l
- Differential - Final Drives - Front43 l
- Differential - Final Drives - Rear43 l
- Hydraulic Tank75 l
- CAPACITIES
- NoteAll non-road Tier 4 Final and Stage V diesel engines must use Ultra Low Sulfur Diesel (ULSD) fuels containing a maximum of 15 ppm (mg/kg) sulfur, EPA (Environmental Protection Agency) and 10 ppm (mg/kg) sulfur maximum for the European Union. Biodiesel blends up to B20 are acceptable when mixed with 15 ppm (mg/kg) sulfur or less ULSD. Biodiesel shall not exceed ASTM D7467 specification (biodiesel blend must meet the specification ASTM D975 for diesel). Cat DEO-ULS™ or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9 specification are required. Diesel Exhaust Fluid (DEF) used in Cat Selective Catalytic Reduction (SCR) systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
- AXLES
- FrontPlanetary Fixed
- RearPlanetary Oscillating
- Oscillation Angle±6°
- BRAKE SYSTEM
- Parking BrakeDrum with spring-applied, hydraulically released shoes
- SOUND LEVELS - TIER 4 FINAL/STAGE V (EU) - STANDARD
- Cab Interior Sound Level (ISO 6396)70 dB(A)
- SOUND LEVELS - TIER 4 FINAL/STAGE V (EU) - LOW VIBRATION
- Cab Interior Sound Level (ISO 6396)70 dB(A)
- SOUND LEVELS - BRAZIL MAR-1 (BRAZIL) AND STAGE III FOR NON-ROAD ENGINES (CHINA), EQUIVALENT TO TIER 3/STAGE IIIA (EU) - STANDARD
- Cab Interior Sound Level (ISO 6396)70 dB(A)
- SOUND LEVELS - BRAZIL MAR-1 STANDARD AND EQUIVALENT TIER 3/STAGE IIIA - QUIET
- Cab Interior Sound Level (ISO 6396)70 dB(A)
- DIMENSIONS (APPROXIMATE)
- Height - Top of Beacon4368 mm
- Height - Cab Roof3878 mm
- Height - Top of Exhaust Stack3547 mm
- Height - Top of Hood2770 mm
- Centerline of Rear Axle to Bumper1990 mm
- Centerline of Front Axle to Hitch1675 mm
- Wheelbase3350 mm
- STRAIGHT BLADE
- Capacity10 m³
- Height1961 mm
- WHEELS
- Biter Tips Plus - Weight (group)6342 kg
- Biter Tips Pallet - Weight (group)5954 kg
Standard Equipment for 816
-
NOTE
- Standard equipment and options may vary. For more information, please consult your Cat dealer.
-
POWERTRAIN
- Advanced Productivity Electronic Control Strategy (APECS)
- Air-to-Air Aftercooler
- Hydraulically Actuated, Oil Immersed, Sealed Disc Service Brakes
- Cat Clean Emissions Module (Tier 4 Final/Stage V only)
- Electro-Hydraulic Parking Brake
- Electronic Clutch Pressure Control (ECPC)
- C7.1 Cat Engine (Configured for two emissions options: - Tier 4 Final/Stage IV - Equivalent to Tier 3/Stage IIIA)
- Engine-Driven Cooling Fan (Suction)
- Electric Fuel Priming Pump
- Air-to-Fuel Cooler
- Ground-Level Engine Shutdown
- Muffler (Under Hood) (Tier 3/Stage IIIA equivalent only)
- Radiator, Coolant Radiator
- Ether Starting Aid
- Throttle Lock
- Planetary Transmission with 2 Speed Range Control (2AV/2AR)
- Torque Converter
-
OPERATOR COMPARTMENT
- 12V Power Outlet for Phone or Laptop Charging
- AccuGrade™ Mapping (Pre-Equipment)
- Roof-Mounted Air Conditioner with Condenser
- Sound-Reduced and Pressurized Cab
- Rear Vision Camera
- Coat and Hard Hat Hooks
- Smooth Shifting Controls
- Foldable Armrest
- Heater and Defroster
- Electric Horn
- Hydraulic Controls - Floor Mounted
- Hydraulic Equipment Lockout
- Instruments and Gauges - DEF Fluid Level (Tier 4 Final/Stage V only) - Engine Coolant Temperature - Fuel Level - Hydraulic Oil Temperature - Speedometer and Tachometer - Torque Converter Temperature
- Warning Indicators - Three-Level Warning System - Brake Oil Pressure - Electrical Circuit, Low Voltage - Engine Warning and Main Indicator - Parking Brake Status
- Four-Post Rollover Protective Structure (ROPS) and Falling Object Protective Structure (FOPS)
- Cab Lighting (Overhead)
- Lunchbox Holder and Cup Holder
- Panoramic Interior Rearview Mirror
- Heated External Mirrors (Mounted)
- CB Radio Readiness
- Ambient Radio Readiness: - Antenna - Speakers - Converter (12V, 10-15A)
- 76mm (3") Seat Belt with Reminder System, Retractable
- STIC Control System with Lock
- Front Windshield Visor
- Tinted Glass
- Transmission Gear Indicator
- Vital Information Management System (VIMS) - Graphical Information Display - External Data Port - Customizable Operator Profiles - Rear-Grille Incident Indicator
- Integrated Wiper/Washer System (Front and Rear) - Intermittent Front and Rear Wipers
- Cat Premium Plus Seat (Leather)
-
PROTECTION
- Axle Guards (Front and Rear)
- Cab Glass Protection
- Enclosure Guards and Powertrain Guards (Hinged)
- Drive Shaft Guard
- Radiator Guard
- Mudguards
-
FLUIDS
- Premixed Extended Life Coolant at 50% Concentration (-34 °C/-29 °F)
-
OTHER STANDARD EQUIPMENT
- DEF Tank Level Gauge (Tier 4 Final/Stage V only)
- Service Access Doors (Lockable)
- Ecologically Friendly Drain Valves for Engine, Radiator, Transmission, Hydraulic Tank
- Engine Oil, Sump, 500 Hour Interval with CJ-4 Oil
- Emergency Egress
- Fire Suppression Ready Package
- 500 L (132 US gal) Fuel Tank
- Towing Hitch with Pin
- Cat XT™ Hoses
- Hydraulic, Engine, and Transmission Oil Coolers
- Quick Oil Change System
- Oil Sampling Taps
- Load Sensing Steering
- Total Hydraulic Filtration System
- Vandalism Locks
- Venturi Stack
-
STANDARD EQUIPMENT - OPERATOR COMPARTMENT
- Glass: Glued-In
- Horn Package - Standard
- Horn Package - Trumpet
- Cab Lights - Standard or LED
- Cab Mirrors - Standard or Heated
- Cab Precleaner - Standard or Powered
- Cab Seat - Standard or Heated and Ventilated
-
STANDARD EQUIPMENT - POWERTRAIN
- Axles: - Axle Arrangement (Front Axle Limited Slip) - Axle Arrangement (Rear Axle Limited Slip) - Axle Arrangement (Front and Rear Axle Limited Slip)
-
STANDARD EQUIPMENT - SPECIAL TOOLS
- Engine Precleaners: - Turbocharger or Two-Stage
-
STANDARD EQUIPMENT - BLADES
- Blade Arrangement - Standard (No Blade)
- Blade Arrangement - Straight Blade
- Blade Arrangement - Angle Blade (No Blade)
-
STANDARD EQUIPMENT - TECHNOLOGY PRODUCTS
- Product Link: - GSM, Satellite
-
STANDARD EQUIPMENT - WHEELS AND CLEANING BARS
- Wheels and Tips: - Wheel Arrangement (Plus Tip 6.25") - Wheel Arrangement (Palette Tip 6.25") - Wheel Arrangement (Plus and Palette Tip 6.25") - Grinder Wheels
- Cleaning Bar Package (Cleaning Fingers and Mud Scraping Bar)
Available Options for 816
-
NOTE
- Standard equipment and options may vary. For more information, please consult your Cat dealer.
-
DRIVER'S COMPARTMENT
- AM/FM/AUX/USB/Bluetooth Radio
-
FLUIDS
- Antifreeze, -50°C (-58°F)
-
SPECIAL EDITIONS
- Engine: Soundproofing
-
STARTING AIDS
- Engine Coolant Heater (120V)
- Engine Coolant Heater, 240V
-
MISCELLANEOUS
- Reflective Film (ANSI) (Tier 4 Final/Stage V only)
- European Certification (Tier 4 Final/Stage V only)
- Manufacturing Year Plate (equivalent Tier 3/European Stage IIIA only)
Media Gallery
Discover Similar Equipment
Compactors
CS12 GC
Operating Weight - with Cab
12,653 kg
Compaction width
2,134 mm
Gross power
83 kW
ExploreCompactors
CB36B
Operating Weight
3,803 kg
Standard compaction width
1,400 mm
Gross power
36.6 kW
ExploreCompactors
CP11 GC
Compaction Width
2,134 mm
Gross power
83 kW
Operating weight - with ROPS/FOPS canopy
11,233 kg
ExploreCompactors
CS78B
Operating Weight - with Cab
18,760 kg
Compaction width
2,134 mm
Gross power
129 kW
Explore