Contact Us
Call Us
Customer Service (Morocco)
Customer Service (International)
Monday to Friday 8am-5:30pm (UTC)
Wheel loaders 994K
Request a QuoteKey Information
Net Power
1,297 kW
Operating weight
242,605 kg
Bucket capacities
19.1 - 43.6 m³
Overview
Do More...in Less Time and with Less Consumption
CAT® large wheel loaders are designed to offer maximum lifespan and ensure optimal availability over multiple lifecycles. Thanks to their optimized performance and simplified maintenance, our machines allow you to move more materials in a safer and more efficient manner, at a lower cost per ton.
Introduced in 1990, the 994 Wheel Loader is now the preferred machine of customers in its category for 25 years. Motivated by the satisfaction and success of our customers, we constantly strive to design new series that perpetuate the tradition of reliability, safety, driver comfort, ease of maintenance, and sustainability.
All images included in this Specalog show a configuration equivalent to Tier 1 EPA standards for the United States/Stage I for the European Union. It is important to note that the configuration equivalent to Tier 4 Final/Stage V for the European Union will have different characteristics, including the presence of a DEF tank.
Advantages
Up to 8% More Material Moved per Liter of Fuel
Moves a significant amount of material...at a lower cost. Helps you do more with less fuel, every hour, every work period, every day.
Up to 29% Increase in Rated Payload
And up to 28% additional breakout force...without a decrease in cycle time.
Easier to Maintain and Refurbish, for a Lower Total Cost of Ownership
Designed to handle the toughest working conditions, while offering easier maintenance and repairs...year after year, refurbishment after refurbishment.
Key Features
- Structures
- Powertrain Group
- Hydraulic circuit
- Driving position
- Technological solutions
- Security
- Ease of maintenance
Structures
Robust Structures Boost your results with ultra-resistant structures capable of performing multiple life cycles and supporting the most difficult loading conditions. The fully enclosed rear chassis resists both torsional forces and shocks, in order to optimize the lifespan of the installed components. The chassis uses moldings in key areas to optimize the chassis lifespan and efficiency. The mounting of the rear axle on the chassis is optimized to better dissipate stress for increased structural integrity. Handling Arms Our lifting arms, whose efficiency has been proven many times in the field, are essential for maximum availability and productivity. Excellent visibility on the bucket blades and work area thanks to the Z-linkage. High load constraints are absorbed by the solid steel lifting arms. Increased resistance in key areas thanks to the use of monobloc moldings. Stress-free lifting arms increase lifespan. Front Linkage To ensure long lifespan and high reliability, the linkage axis joints have a greased pin design and a standard automatic lubrication system.
Powertrain Group
Rotor Clutch Torque Converter (ICTC) and Rim Effort Control System (RCS) Reduce your cost per ton by using advanced ICTC and RCS systems to control the effort at the rim. Reduce tire slippage and wear by controlling the effort at the rim from 100 to 25% using the left brake pedal. Once the position corresponding to a 25% reduction in rim effort is reached, the pedal is used for braking again. Decrease the risk of wheel slippage without reducing the hydraulic efficiency of the machine thanks to RCS. Improve energy efficiency in certain applications with the lock-up torque converter for direct drive. Steering and Integrated Transmission Control System (STIC™) Benefit from maximum responsiveness and control with the STIC system, which combines direction selection, gear selection, and steering in a single lever. A simple movement of the lever to the right or left allows for turning, minimizing driver effort. Ultra-easy gear selection at the touch of a finger. Smoother, faster cycles and less fatigue for operators thanks to integrated controls that require minimal effort. Cat Planetary Powershift Transmission Your success relies on a superior transmission specifically designed for mining applications. Smooth and efficient gear shifting thanks to integrated electronic controls. Longevity and reliability ensured by heat treatments of the gears. Three forward gears and three reverse gears to adapt to all your applications. 3516E Cat Engine The 994K maintains a long lifespan and high reliability thanks to the proven engines of the 3500 series. At the heart of the 994K is the new 3516E engine. Its 16 four-stroke cylinders naturally provide optimal performance. Customizable performance thanks to turbochargers and intake coolers. High torque reserve: a 39% torque reserve provides high overload force for excavation and acceleration under heavy rim effort conditions. Longer stroke and lower nominal engine speed extend the engine's lifespan. Quick engine response thanks to the use of electronic controls. Economy Mode Provides maximum productivity and efficiency day after day. The systems of the 994K implement advanced technologies to help you save fuel. By using demand acceleration, drivers can maintain normal operation with the left pedal and equipment, while the 994K manages the engine speed. Provides a similar feel and control to our traditional acceleration lock feature. Combines the efficiency of manual acceleration with the ergonomics of acceleration lock.
Hydraulic circuit
Positive Flow Control Hydraulic Circuit Increases efficiency with our positive flow control hydraulic system. The positive flow control has simultaneous control of pump and valve. By optimizing pump control, the hydraulic oil flow is proportional to the lever movement of the equipment. The four variable displacement, electronically controlled pumps allow for fast and productive cycles. Improved bucket control and sensitivity Consistent performance and efficiency with less circuit heating. Electro-Hydraulic Controls Increase driver productivity with these equipment features. Work comfortably with electronically controlled hydraulic cylinder stops. Enjoy smooth and easy-to-use controls. Automatic and easy disengagement of equipment from inside the cabin. Single-axis manipulators or levers are now available. Steering Circuit Safe loader operation starts with precise machine control. That's why we equipped our 994K wheel loader with a load sensing hydraulic steering circuit. Efficient variable displacement piston pumps. Ensure precise positioning for easy loading in tight workspaces with a 40-degree articulation angle. Enhance driver comfort with integrated steering and transmission controls. Filtration System Benefit from improved performance and reliability of your hydraulic circuit with our advanced filtration system. Return filters for lift/tilt to the tank. High-pressure lift/tilt filters. Return filters for steering to the tank. High-pressure steering screen. Return hydraulic filters to the tank. Powertrain filters for transmission, torque converter, and pump drives. Oil screens for front and rear brakes. Cooling Circuit Standard variable speed fan to improve cooling efficiency and performance. High-temperature cooling package for hot climates. Optional fan control for efficient cooling performance in cold weather.
Driving position
More efficient and comfortable work for drivers thanks to a cabin inspired by our customers. Deluxe Driver's Seat Improve driver comfort and reduce fatigue with the Comfort Cat series III seat. Possibility to integrate a heated and ventilated seat, with leather seat reinforcement surfaces. High backrest design and ultra-thick padded cushions. Pneumatic suspension system. Levers and seat controls within reach. Adjustable in 6 directions. Equipment control box and STIC steering mounted on the seat and moving with it. 76 mm (3 in) wide retractable seat belt. Foldable armrest/STIC steering. Instructor Seat Comfortably train other drivers with our instructor seat. 76 mm (3 in) wide retractable seat belt. Foldable seat with cup holder and molded storage compartment. Driving Station Improve the productivity of your drivers with the clean and comfortable environment of our cabins. Enjoy the low level of vibrations achieved thanks to the new cabin viscous mounts and pneumatic seat suspension. Maintain the desired temperature inside the cabin with automatic temperature controls. Pressurized cabin with pressure indicator. Low noise levels for the driver. Possibility to integrate a heated and ventilated seat, with leather seat reinforcement surfaces and a seat headrest.
Technological solutions
Integrated electronic controls provide varying levels of information for the job site and the operator. This integration creates an intelligent machine and allows the operator to be better informed for improved productivity. Displaying Information We have worked tirelessly to help our customers and operators improve their performance through our optimized touch screen. Intuitive operation and easy navigation through our enhanced user interface. Operators kept informed at all times of machine circuit operation for reduced maintenance times. Vital Information Management System (VIMS™) Connect directly to the machine to access a wide range of sensor and machine data. Create productivity reports including payload and work cycle segmentation. Identify driver training needs through productivity data. Detailed recording of machine parameters and diagnostic codes. Track sensor information with trend analysis and histograms to monitor machine condition. Cat Production Measurement (CPM) This system allows for payload weighing from the cab so that operators can work more efficiently and confidently provide accurate loads. Advanced CPM weighing modes enable payload accuracy and accelerate loading cycles.
Security
Access to the Machine We are constantly improving our products to provide a safe working environment for the operator and people working on the site. Access to the Machine Wider stairs with 45° angles provide easy access to the 994K for operators. The wide walkways have non-slip surfaces and locking/tagging points integrated into maintenance areas. Windshield cleaning platforms provide secure and convenient access for the operator. Three points of contact can be maintained at all times through maintenance areas accessible from the ground or a platform. The emergency exit ladder provides a third exit if necessary. Visibility Cat Detect, which includes Cat Vision plus an object detection radar system, improves the operator's awareness of the machine's surroundings. Standard installed LED headlights provide excellent visibility of the work area. Programmable LED warning lights for site-specific signaling. The six-mirror system improves the driver's vision of the sides and rear of the machine. A heated option is also available. Retractable sunshade as standard. A higher cab position to improve visibility during dump truck loading operations. Operator's Station The cab's viscous mounts and air-suspension seat reduce machine vibrations felt by the operator. Low interior noise levels. Standard 76mm (3in) seat belt with reminder system. Optional 4-point anchor seat belt with reminder system. The instructor seat for the operator, equipped with a 76mm (3in) seat belt, facilitates the training of a new operator. Motorized Access System The Cat motorized access system allows for easier access to the first steps by allowing for easier climbing onto or descending from the rear platform. A safe and ergonomic access system. All operators have enough space to safely use the wide stairs. The use of handrails located on both sides of the stairs ensures a constant three-point contact. Raise or lower the stairs from the cab or the ground.
Ease of maintenance
Because the very design of our 994k allows for increased availability, it will be the key to your success. The standard and comprehensive filtration system allows for clean fluids and thus ensures high reliability of components. Safe and convenient maintenance thanks to grouped maintenance points, accessible from the ground or platform. Swinging doors on both sides of the engine compartment facilitate access to daily maintenance checkpoints. Environmentally friendly drain valves facilitate maintenance and prevent spills. Centralized remote pressure taps. Reduce downtime with notifications from our VIMS management system, allowing drivers and technicians to address issues before they even occur. The electric air filter extends the life of the cabin filter. Optional lighting for main maintenance compartments.
Contact Our Experts
Morocco
International
Monday to Friday 8am-5:30pm (UTC)
Product Specifications for 994K
- ENGINE
- Net Power1297 kW
- Engine Model3516ECAT®
- Bore170 mm
- Stroke215 mm
- Displacement78.1 l
- Rated Speed1,600 RPM
- EmissionsEquivalent to U.S. EPA Tier 4 Final/European Stage IV* or U.S. EPA Tier 1/European Stage I
- Gross Power - SAE J19951394 kW
- Maximum Torque (1200 RPM) - SAE J199511,591 Nm
- Gross Power - ISO 143961377 kW
- Torque Rise39%
- Net Power - SAE J1349 - Standard Ambient Temp1297 kW
- Note (4)*Tier 4 Final/EU Stage IV configuration is prepared to meet Stage V emission requirements once they come into effect.
- Net Power - SAE J1349 - High Ambient Temp1265 kW
- Note (1)Rated power applies when tested under standard conditions.
- Note (2)Advertised net power is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and muffler.
- Note (3)Advertised gross power is with the fan at maximum speed.
- OPERATING CHARACTERISTICS
- Operating Weight242,605 kg
- Bucket Capacity Range17.2 - 43.6 m³ (22.3 - 57 yd³)
- Nominal Payload: Standard Lift (Moderate to High Digging Resistance)40.8 t
- Nominal Payload: Standard Lift (Low to Moderate Digging Resistance)54.4 t
- Nominal Payload: High Lift (Moderate to High Digging Resistance)38.1 t
- Nominal Payload: High Lift (Low to Moderate Digging Resistance)49.9 t
- Bucket Capacity Range (Iron Ore)17.2 - 21.4 m³ (22.3 - 28 yd³)
- Bucket Capacity Range (Rock)19.1 - 29.1 m³ (25 - 38 yd³)
- Bucket Capacity Range (Coal)32.1 - 43.6 m³ (42 - 57 yd³)
- Note*Under Low to Moderate Digging Resistance: Contact your local dealer to determine if this increased nominal payload is right for your application.
- TRANSMISSION
- Transmission TypeCat Planetary Powershift
- Forward - 17.4 km/h
- Forward - 212.9 km/h
- Forward - 321.9 km/h
- Reverse - 18.1 km/h
- Reverse - 214.1 km/h
- Reverse - 324 km/h
- Direct Drive, Forward 324.5 km/h
- Direct Drive, Reverse 327 km/h
- Direct Drive, Reverse 1Lockout Disabled
- Direct Drive, Forward 214 km/h
- Direct Drive, Reverse 215.5 km/h
- Direct Drive, Forward 1Lockout Disabled
- NoteTravel speeds based on 58/85-57 tires.
- HYDRAULIC SYSTEM: LIFT/TILT
- Relief Valve Setting - Lift/Tilt32,500 kPa
- Maximum Flow at Engine RPM of 17002047 l/min
- Double Acting Lift - Bore and Stroke310 × 1086 mm (12.2 × 42.8 in)
- Double Acting Tilt - Bore and Stroke370 × 1713 mm (14.6 × 67.4 in)
- Pilot CircuitOpen Loop with Pressure Compensation
- Lift/Tilt Circuit: Pump TypeVariable Displacement Piston
- Lift/Tilt Circuit: Circuit TypePositive Flow Control
- HYDRAULIC CYCLE TIME
- Raise12.6 s
- Dump3.1 s
- Lower4.9 s
- Float Down4.2 s
- Total Hydraulic Cycle Time - Empty Bucket23.5 s
- FULL CIRCUIT FILLING
- Hydraulic Tank - Steering and Brakes379 l
- Transmission416 l
- Fuel Tank, Standard3445 l
- Hydraulic Tank - Equipment and Hydraulic Fan1022 l
- Crankcase288 l
- Cooling System520 l
- Fuel Tank, With 24-hour Equipment5678 l
- Differential - Final Drives - Rear757 l
- Differential - Final Drives - Front833 l
- Oil Renewal System (ORS)*75.7 l
- Diesel Exhaust Fluid (DEF) (Tier 4 Final/Stage IV)519 l
- Note*Not available on Tier 4 Final machines. Not available in all regions.
- BUCKETS
- Bucket Capacities19.1-43.6 m³ (25-57 yd³)
- AXLES
- FrontFixed
- RearOscillating Hitch
- Swing Angle9°
- BRAKES
- BrakesISO 3450:2011
- SOUND LEVELS: STANDARD
- Operator Sound Level (ISO 6396:2008): Equivalent to Tier 1/European Stage I72 dB(A)
- Machine Sound Level (ISO 6395:2008)119 dB(A)
- Operator Sound Level (ISO 6396:2008): Tier 4 Final/Stage IV for European Union*72 dB(A)
- Acoustic PerformancesMeasurement taken at 70% of maximum engine cooling fan speed. Hearing protection may be needed when using an open cab machine and working in an unenclosed area for extended periods or in noisy environments.
- Note*Stage V preparation for European Union.
- HYDRAULIC SYSTEM: STEERING
- Maximum Flow at Engine RPM of 1700980 l/min
- Relief Valve Setting - Steering31,000 kPa
- Steering Circuit: Circuit TypeLoad Sensing, Pilot Operated
- Total Steering Angle80°
- Steering Circuit: Pump TypeVariable Displacement Piston
- Steering Cycle Time - Low Idle7.6 s
- Steering Cycle Time - High Idle, Unloaded4.3 s
- COOLING SYSTEM
- Hydraulic Variable Speed Fan with Ambient Capacity: Standard43 °C
- Hydraulic Variable Speed Fan with High Capacity* (Tier 4 Final)53 °C
- Hydraulic Variable Speed Fan with High Capacity (Equivalent to Tier 1)55 °C
- DIMENSIONS (APPROXIMATE) - STANDARD LIFT
- From Front Axle Center to Bucket Edge6503 mm
- Dump Angle - Ground Level47.7°
- Max Lift Height6167 mm
- Ground to Top of ROPS7118.5 mm
- Max Overall Length19508 mm
- Max Overall Height, Bucket Raised11771 mm
- Max Reach at Max Lift2821 mm
- Dump Angle at Max Lift59.4°
- Ground to Exhaust Stack Top7067 mm
- Dump Height from Ground to Bumper1355 mm
- Dump Angle at Max Lift–50.0°
- Width Over Tires, With Protrusions5758 mm
- Ground to Axle Center1820 mm
- Belt Width4300 mm
- NoteSupports 22.9 m³ (30 yd³) bucket for standard lift and 21.4 m³ (28 yd³) bucket for high lift, equipped with Cat Advansys™ tips. Accepts 58/85-57 tire sizes.
- Bucket Pin Height at Max Lift8790 mm
- Dump Angle - Transport47.7°
- From Rear Axle Center to Bumper6205 mm
- Ground Clearance at Pivot Pin898 mm
- Ground to Top of Hood5682 mm
- Wheelbase6800 mm
- DIMENSIONS (APPROXIMATE) - HIGH LIFT
- Dump Angle - Transport63.7°
- Max Reach at Max Lift2688 mm
- Ground Clearance at Pivot Pin898 mm
- Max Overall Length20102 mm
- Dump Height from Ground to Bumper1355 mm
- Dump Angle - Ground Level45.0°
- Belt Width4300 mm
- Max Lift Height7095 mm
- Dump Angle at Max Lift–50.0°
- From Rear Axle Center to Bumper6205 mm
- Ground to Axle Center1820 mm
- Wheelbase6800 mm
- Max Overall Height, Bucket Raised12545 mm
- Ground to Top of Hood5682 mm
- Width Over Tires, With Protrusions5760 mm
- Bucket Pin Height at Max Lift9647 mm
- Ground to Exhaust Stack Top7067 mm
- From Front Axle Center to Bucket Edge7097 mm
- Dump Angle at Max Lift59.4°
- Ground to Top of ROPS7118.5 mm
- NoteSupports 22.9 m³ (30 yd³) bucket for standard lift and 21.4 m³ (28 yd³) bucket for high lift, equipped with Cat Advansys™ tips. Accepts 58/85-57 tire sizes.
- SOUND LEVELS: SOUNDPROOFING
- Operator Sound Level (ISO 6396:2008): Tier 4 Final/Stage IV for European Union*71 dB(A)
- Note*Stage V preparation for European Union.
- Machine Sound Level (ISO 6395:2008)117 dB(A)
- Acoustic PerformancesMeasurement taken at 70% of maximum engine cooling fan speed. Hearing protection may be needed when using an open cab machine and working in an unenclosed area for extended periods or in noisy environments.
- Operator Sound Level (ISO 6396:2008): Equivalent to Tier 1/European Stage I71 dB(A)
Standard Equipment for 994K
-
NOTE
- Standard equipment and options may vary. For more information, please consult your Cat dealer.
-
POWERTRAIN
- Engine, 3516E High Displacement MEUI-A (Mechanical Electronic Unit Injector) Electronic Unit Injector, Air-to-Air Aftercooled (ATAAC) Diesel, Turbocharged with Air-to-Air Aftercooler (ATAAC)
- Engine Precleaner
- Electric Fuel Priming Pump
- Engine Shutoff Switch at Ground Level
- Engine Air Intake Precleaner (Above Hood)
- Aluminum Modular Radiator (AMR)
- Automatic Ether Starting Aid
- Electronic Throttle Lock
- Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and Rimpull Control System
- Rimpull Control System
- Three-Speed Powershift Planetary Transmission with Electronic Control for Forward and Reverse
- Delayed Engine Shutdown
- Oil-Cooled, Multiple Disc Brakes
- Electrohydraulic Parking Brake
-
STEERING
- Standard Steering (90,000 lb/100,000 lb US for Face, 120,000 lb/130,000 lb US Bulk)
-
ELECTRICAL EQUIPMENT
- Alternator
- Dry Batteries
- 10/15A, 24V to 12V Converter
- Bumper Starter Cutout
- LED Beacons (Selectable Type)
- LED Work Lights (Access and Service Lights, Turn Signals/Four-Way Flashers)
- Emergency Start Receptacle
- Starter and Transmission Lockout in Bumper
- 24V Starting and Charging Circuit
- Electric Starting Motors
- 24V Starting and Charging Circuit
- Electric Starting Motors
-
OPERATOR'S COMPARTMENT
- Laminated, Tinted Glass
- Premium Seat with Heated and Cooled Leather, Adjustable Lumbar, Ventilated Adjustable Bolsters on Seat and Backrest, Adjustable Seat Cushion Tilt and Length
- Dual Lever Lift/Tilt Controls
- Implement Disconnects
- Air Conditioner
- Cabin Pressure Indicator
- Graphical Touch-Screen Information Display Transmits Real-Time Operating Functions and Payload Measurement
- Heater, Defroster, and Automatic Temperature Controls
- Gauges
- DEF Level, as Equipped
- Coolant Temperature
- Hydraulic Oil Temperature
- Fuel Level
- Powertrain Oil Temperature
- Engine Speed (Tachometer)
- Transmission Gear
- Ground Speed
- Maintenance Meter
- Gauge/Warning Lights
- Low DEF Level (as Equipped)
- Three-Level Warning System
- Brake System Failure
- Bucket Free Position
- Delayed Engine Shutdown State
- Engine Idle Shutdown State
- Engine Failure
- Fuel Economy Mode State
- Hydraulic Safety State
- Lockup Clutch Activation State
- Low Fuel Level State
- Parking Brake State
- Quick Shift State
- Rimpull Control State
- Seat Belt Warning
- Secondary Steering
- Throttle Lock State
- Turn Signals
- Backlit Dashboard Control
- Hazard Lights
- Cabin Dome Light
- Lunch Box and Cup Holder Mounts
- Steering and Transmission Integrated Control System (STIC)
- Retractable Sun Visor (Front and Rear)
- Vital Information Management System (VIMS) with Information Display: External Data Port, Cycle Timer, Integrated Cat Production Measurement (CPM)
- Keyboard, Messenger, ET, VIMS
- Coat Hook
-
SAFETY
- Electric Horns (Field and Shop)
- Access Steps at Ground Level
- Rear Vision Camera
- Front Chassis Access with Steps
- Front Walkway around Cab
- Pump Compartment Access Ladders with T-Handle and Platform
- ROPs and Radiator Guards
- Steering Lock
- Stairs on Both Sides of Machine
- LED Access and Stair Lights
- Kick Plates
- 76mm (3in) Retractable Seat Belt
- Instructor Seat with 76mm (3in) Under-Abdominal Seat Belt
- Backup Alarm
- Secondary Steering
-
MACHINE CONTROL AND GUIDANCE
- Cat Production Measurement (CPM) Payload Measurement System
-
FUEL TANK
- 12 Hours (3440L/910gal)
-
COOLING SYSTEM
- Standard Cooling Package (Recommended for Site Conditions up to 43°C [110°F])
-
MAINTENANCE
- Ground-Level Service Center, Including:
- Service Center Lighting
- Cooling Fan and Equipment Oil Level Indicator
- Steering and Brake Oil Level Indicator
- Windshield Washer Solvent Level Indicator
- Transmission Oil Level Indicator
- DEF (Diesel Exhaust Fluid) Level Indicator, as Equipped
- Fuel Level Indicator
- Engine Oil Level Indicator
- Engine Coolant Level Indicator
- Automatic Lubrication System Grease Reservoir Level Indicator
- DEF Purge Indicator
- Starter Lockout and Diode
- Heavy-Duty Battery Disconnect
- Stair Lighting Switch
- Service Lighting Switch, as Equipped
- Engine Shutdown and Fuel Cutoff Switch
- Engine Quick Oil Fill
- Transmission Quick Oil Fill
- Steering and Brake Hydraulic Quick Oil Fill
- Steering and Brake Hydraulic Drain
- Oil Renewal System Quick Fill
- Engine Coolant Quick Fill
- DEF Fill (HRC Only)
- Cooling Fan and Equipment Hydraulic Quick Oil Fill
- Cooling Fan and Equipment Hydraulic Drain
- Automatic Lubrication System Grease Reservoir Quick Fill
- 24V Auxiliary Starting Receptacle
- Engine Oil and Cylinder Water Heater 240V Receptacle, as Equipped
- 12V Power Port
- VIMS (Vital Information Management System) Switch
- 14-Pin Machine Data Port
- VIMS Messenger Display
- Cartridge-Type Return-to-Tank Filters with In-Line Magnetic Plugs on Equipment, Cooling Fan, and Brake and Steering Pumps
- High-Pressure Screens on Equipment Outlet, Cooling Fan, Brake, and Steering Pumps
- Pump Efficiency Monitoring
- Lubricates Linkage, Articulation, Steering, and Axle Pivot Bearings
- Electronic Pressure Control for Automatic Lubrication System Eliminates Pressure Adjustments and Monitors Grease Thickness to Match Temperature
- Raising on Linkage Grease Lines
- Cat O-Ring Face Seals
- Lockable Access Doors for Service
- Eco-Friendly Drain Valves for Engine, Radiator, Hydraulic Tank, Brake and Steering Tank, Brake Cooling Tank, and Axles
- Ultra-Fast Engine Oil Drain
- Ground-Level Fuel Tank Fill
- Transmission Guard
- Hitch Pintle with Pin
- Cat XT™ Hose
- Left-Side Service Center
- Oil Sampling Taps
-
EFFICIENCY
- Economy Mode
- Variable Displacement Implement Pumps
- Load-Sensing and Variable Displacement Steering
- Variable Displacement Cooling Fan Pump
- Converter Lockup Clutch
Available Options for 994K
-
NOTE
- Standard equipment and options may vary. For more information, please consult your Cat dealer.
-
SPARE RIMS
- Flange 1118mm (44in) 152mm (44 _ 57) (6in)
- Flange 1194mm (47in) 152mm (44 _ 57) (6in)
- Flange 1194mm (47in) 127mm (47 _ 57) (5in)
-
NOISE LEVELS
- Soundproofing Package
-
RIMS AND TIRES
- Rims - Flange 1118mm (44in) 152mm (44 _ 57) (6in) for use with 53.5/85-57 76PR L5 Tires
- Tires - 53.5/85-57 76PR L5 (requires 44-inch rims)
- Rims - Flange 1194mm (47in) 127mm (47 _ 57) (5in) for use with 60/80 R57L5R XMine D2 SR Tires
- Tires - 58/85-57 84PR L4 (requires 47-inch rims)
- Rims - Flange 1194mm (47in) 152mm (47 _ 57) 152mm (6in) for use with 58/85-57 84PR L4 Tires
-
ELECTRICAL EQUIPMENT
- Maintenance Indicators
-
POWERTRAIN
- Oil Renewal System (ORS) (not available on Tier 4 Final machines. Not available in all regions.)
-
STEERING
- High Lift Arrangement (38.1 tons/42 tons US at face, 49.9 tons/55 tons US at loose)
-
DRIVER'S COMPARTMENT
- Solar Control, Impact-Resistant, Rubber-Mounted Glazing (compliant with AS/NZS 2080 standard)
- Lift/Tilt Function Controls by Joystick
- AM/FM/AUX Radio
- AM/FM/AUX/USB/BT/CD/SAT Radio
-
SAFETY
- Motorized Ground Access Stairway
- Cat Detect (Rear Object Detection)
- Wheel Chocks
-
COLD WEATHER
- Cooling Fan Bypass for Cold Weather (recommended for temperatures below –29°C [–20°F])
- Heavy-Duty Starter (provides an additional electric starter motor and two additional batteries, total of three starter motors and six batteries) (recommended for temperatures below 0°C [32°F])
- 240V Coolant and Oil Heaters (recommended for temperatures ranging from –18°C to –30°C [from 0°F to –22°F])
- Fuel Heater (heated by recirculation using engine heat and heat exchanger) (recommended for temperatures ranging from –18°C to –30°C [from 0°F to –22°F])
- Heated Mirrors (recommended for temperatures below freezing)
-
MACHINE CONTROL AND GUIDANCE
- Cat Terrain Ready Option
-
FUEL TANK
- 24 Hours (5700L/1506gal)
-
COOLING
- High Temperature Cooling Package (recommended for site conditions up to 53°C [127°F])
Media Gallery
Discover Similar Equipment
Wheel loaders
992
Net Power
607 kW
Operating weight
105,882 kg
Bucket capacities
11.5 - 24.5 m³
ExploreWheel loaders
950
Maximum Power - 2,100 rpm - ISO 14396
186 kW
Operating weight
18,076 kg
Engine model
C7.1 CAT®
ExploreWheel loaders
924K
Maximum Gross Power
105 kW
Operating weight
11,795 kg
Bucket capacities
1.7 - 5.0 m³
ExploreWheel loaders
966 GC
Net Power - ISO 9249
196 kW
Operating weight
21,577 kg
Engine model
C9.3B CAT®
Explore