Contact Us
Call Us
Customer Service (Morocco)
Customer Service (International)
Monday to Friday 8am-5:30pm (UTC)
Wheel loaders 924K
Request a QuoteKey Information
Maximum Gross Power
105 kW
Operating weight
11,795 kg
Bucket capacities
1.7 - 5.0 m³
Overview
Configured for Success
The Cat 924K wheel loader is the new benchmark in terms of productivity, energy efficiency, and driver comfort. The improved Z-bar linkage has been optimized to provide the fast loading performance of a traditional Z-bar linkage, with the added ability for parallel lifting and load management. The high-torque, low-speed C7.1 engine works in conjunction with an intelligent hydrostatic drivetrain to deliver high energy efficiency as standard.
Key Features
- Power and Efficiency
- An Easy Job
- Enjoy Comfort All Day Long
- Customize Your Experience
Power and Efficiency
Enjoy the energy efficiency of hybrid machines equipped with an intelligent hydrostatic powertrain that allows you to achieve the best fuel savings on the market thanks to a lower maximum engine speed (only 1600 rpm in Standard mode). With Caterpillar's exclusive Power-By-Range technology, you get power when you need it: it increases power in Range 4 to accelerate on inclines. For your most demanding and difficult applications, a new Performance mode increases power and hydraulic speed in all ranges to complete the work even faster. Compliant with EPA Tier 3 emissions standards for the United States/Stage IIIA for the European Union/equivalent MAR-1 for Brazil, the CAT® C7.1 Engine is fully self-contained. This allows you to fully focus on your work.
An Easy Job
Move more materials with Caterpillar's patented equipment: the Performance series quick coupler buckets and the optimized Z-bar linkage that combines the excavation efficiency of a traditional Z-bar linkage with the features of tool carriers. Its parallel lifting and digging forces throughout its operating range allow you to handle loads safely and confidently, while prioritizing precise control. Multifunction applications have never been easier thanks to dedicated pumps for each circuit and a flow distribution equipment distributor managed by an intelligent power management system. Lift, steer, and maneuver simultaneously, without any compromise. The K-series compact wheel loader simply obeys your every command!
Enjoy Comfort All Day Long
Take a seat inside the new small wheel loader of the K series and enjoy the excellent panoramic visibility and effortless joystick controls, which follow your movements on the fully adjustable suspension seat. The generous dimensions of the operator station, combined with Caterpillar's exclusive hydraulic cylinder damping system and smooth and consistent controls, make it the most comfortable seat on the job site.
Customize Your Experience
The driving modes associated with the industry's very first Hystat™ system designed by Caterpillar, equipped with four unique drivetrain settings, allow you to meet the requirements of your applications while adapting to your personal preferences. Select the classic torque converter for greater flexibility, the classic Hystat system for aggressive engine braking, the Ice mode to optimize vehicle control on slippery surfaces, or the default mode that combines the best features of the Hystat system and torque converter. The touch-sensitive buttons and the optional second screen allow you to configure the machine's performance with precision and simplicity. You can also quickly adjust the hydraulic response, the disengagement positions of the linkage, the maximum wheel torque, and the maximum ground speed to efficiently perform multiple tasks.
Contact Our Experts
Morocco
International
Monday to Friday 8am-5:30pm (UTC)
Product Specifications for 924K
- ENGINE
- Maximum Gross Power105 kW
- Rated Net Power at 1,800 RPM - SAE J1349 (Power Mode: Range 1-4)102 kW
- Engine ModelC7.1 CAT®
- Maximum Gross Power - ISO 14396 (DIN) (Power Mode: Range 1-4)105 kW
- Rated Net Power102 kW
- Maximum Gross Power - ISO 14396 (Power Mode: Range 1-4)105 kW
- Displacement (Power Mode: Range 1-4 RPM Range)7.01 l
- Rated Net Power at 1,600 RPM - SAE J1349 (Standard Mode: Range 1-3*)98 kW
- Maximum Gross Torque - ISO 14396 (Standard Mode: Range 1-3*)725 Nm
- Maximum Net Torque - SAE J1349 (Power Mode: Range 1-4)704 Nm
- EmissionsThe engine meets EPA Tier 3 emission standards for the U.S./Stage IIIA for the European Union/equivalent MAR-1 for Brazil.
- Rated Net Power at 1,800 RPM - ISO 9249 (DIN) (Power Mode: Range 1-4)103 kW
- Maximum Gross Power - 1,800 RPM - ISO 14396 (Power Mode: Range 1-4)105 kW
- Note*Power at Range 4 is increased to the level of the Power Mode.
- Maximum Net Torque - SAE J1349 (Standard Mode: Range 1-3*)704 Nm
- Maximum Gross Power - 1,600 RPM - ISO 14396 (Power Mode: Range 1-3*)101 kW
- Displacement (Power Mode: Range 1-3 RPM Range)7.01 l
- Rated Net Power at 1,600 RPM - ISO 9249 (DIN) (Standard Mode: Range 1-3*)99 kW
- Maximum Gross Power - ISO 14396 (DIN) (Standard Mode: Range 1-3*)101 kW
- Maximum Net Torque - ISO 9249 (1977)/CEE 80/1269 (Power Mode: Range 1-4)711 Nm
- Maximum Gross Torque - ISO 14396 (Power Mode: Range 1-4)725 Nm
- Maximum Gross Power - ISO 14396 (Standard Mode: Range 1-3*)101 kW
- Note (1)The rated net power is the power available at the flywheel when the engine is equipped with an alternator and an air cleaner.
- Maximum Net Torque - ISO 9249 (1977)/CEE 80/1269 (Standard Mode: Range 1-3*)711 Nm
- Maximum Gross Power - 1,600 RPM - ISO 14396 (metric) (Standard Mode: Range 1-3*)137 hp
- Maximum Gross Power - 1,800 RPM - ISO 14396 (metric) (Power Mode: Range 1-4)143 hp
- Net Power - 1,600 RPM - SAE J1349 (Standard Mode: Range 1-3*)98 kW
- Net Power - 1,800 RPM - ISO 9249 (metric) (Power Mode: Range 1-4)140 hp
- Net Power - 1,800 RPM - SAE J1349 (Power Mode: Range 1-4)102 kW
- Net Power - 1,600 RPM - ISO 9249 (metric) (Standard Mode: Range 1-3*)135 hp
- BUCKETS
- Bucket Capacities1.7-5.0 m3 (2.2-6.5 yd3)
- Light Material Bucket Capacities3.1 to 5.0m3 (4.0 to 6.5yd3)
- General Purpose Bucket Capacities1.7 to 2.5m3 (2.2 to 3.2yd3)
- WEIGHT
- Operating Weight11,795 kg
- Operating Weight - Tires 20.511,795 kg
- Operating Weight - Tires 17.511,429 kg
- CAB
- ROPSSAE J1040 MAY94, ISO 3471-1994.
- FOPSSAE J/ISO 3449 AUG98, Level II, ISO 3449 1992, Level II.
- Note (2)Half cab available as an option.
- Note (1)Rollover Protective Structure (ROPS) cab is standard.
- MAINTENANCE CAPACITIES
- Hydraulic Tank90 l
- Cooling System32 l
- Transmission - Transmission8.5 l
- Hydraulic System - Including Tank160 l
- Fuel Tank195 l
- Front Axle21 l
- Crankcase19.5 l
- Rear Axle21 l
- TRANSMISSION
- NotesDefault setting is 7 km/h (4.4 mph).
- Note*Creeper speed control allows optimal speed range setting, 1 to 13 km/h (0.6 to 8 mph) in Range 1 via the second display.
- Travel Speeds - Range 213 km/h
- Travel Speeds - Range 1*1 to 13 km/h (0.6 to 8 mph)
- Travel Speeds - Range 440 km/h
- Travel Speeds - Range 327 km/h
- SOUND LEVELS
- Note (1)Dynamic operator sound pressure level is 72 dB(A) when ISO6396:2008 is used to measure value for enclosed cab.
- Note (2)Measurement was done at 70% of maximum engine cooling fan speed. Cab doors and windows were closed.
- Note (
- 3)The declared exterior sound power level is 104 dB(A), as per ISO6395:2008 measurement method.
- TIRES
- Other region-specific options (2)17.5 R25 radial ply (L-2); 17.5 R25 radial ply (L-5); 550/65 R25 radial ply (L-3); Flexport™ Gen II; forestry/agriculture
- Other region-specific options17.5 R25, radial ply (L-3); 17.5-25 16 PR (L-3); 20.5-25 16 PR (L-3)
- Note (2)In some applications, loader production capabilities may exceed tire capacity (given as t-km/h (t-mph) rating).
- Other region-specific options (1)20.5 R25 radial ply (L-2); 20.5 R25 radial ply (L-3); 20.5 R25 radial ply (L-5); 20.5-25 12PR (L-2); 20.5-25 12PR (L-3); 20.5-25 12PR (L-5)
- Note (1)Other tire types available. Contact Cat dealer for additional information.
- Note (3)Prior to selection, Caterpillar recommends consulting with the tire supplier to determine suitability based on application.
- Standard Size20.5 R25 radial ply (L-3)
- STEERING
- Maximum Steering Torque - 40° (Maximum Steering Angle)37,620 Nm
- Articulation Steering Angle - Both Directions40°
- Maximum Flow - Steering Pump125 l/min
- Number of Steering Wheel Turns - Full Left to Full Right or Vice Versa3.5 turns
- Maximum Steering Torque - 0° (Machine in Straight Line)50,375 Nm
- Steering Cycle Time - Lock-to-Lock - At 1,800 RPM: Steering Wheel Speed of 90 RPM2.4 s
- Maximum Operating Pressure - Steering Pump24,130 kPa
- LOADER HYDRAULIC CIRCUIT
- Hydraulic Cycle Times - Standard Mode at 1,600 RPM - Total Hydraulic Cycle Time10.6 s
- Hydraulic Cycle Times - Standard Mode at 1,600 RPM - Free Lift, Max. Lift to Ground2.6 s
- Maximum Flow - Implement Pump - Maximum Flow of 4th Function*150 l/min
- Hydraulic Cycle Times - Standard Mode at 1,600 RPM - Raise, Ground to Max. Lift6.3 s
- Hydraulic Cycle Times - Performance Mode at 1,800 RPM - Free Lift, Max. Lift to Ground2.6 s
- Maximum Discharge Pressure - Tilt Cylinder - Maximum Operating Pressure of 3rd Function26,000 kPa
- Maximum Flow - Implement Pump - 3rd Function*150 l/min
- Maximum Operating Pressure - Implement Pump26,000 kPa
- Maximum Flow - Implement Pump150 l/min
- Hydraulic Cycle Times - Performance Mode at 1,800 RPM - Total Hydraulic Cycle Time9.5 s
- Maximum Discharge Pressure - Tilt Cylinder - Maximum Operating Pressure of 4th Function26,000 kPa
- Hydraulic Cycle Times - Performance Mode at 1,800 RPM - Raise, Ground to Max. Lift5.4 s
- Maximum Discharge Pressure - Tilt Cylinder28,000 kPa
- Hydraulic Cycle Times - Performance Mode at 1,800 RPM - Dump, at Maximum Lift Height1.5 s
- Hydraulic Cycle Times - Standard Mode at 1,600 RPM - Dump, at Maximum Lift Height1.7 s
- Note*Adjustable from 20 to 100% of max flow through the secondary display, dependent on equipment.
- AXLES
- FrontFixed, Open Differential (Standard), Locking Differential (Optional)
- RearOscillating ±11°, Open Differential (Standard), Limited Slip Differential (Optional in certain regions)
Standard Equipment for 924K
-
POWERTRAIN
- Automatic Engine Idle Shutdown
- Axle Seal Guards
- C7.1 Cat Engine
- Power Modes (Standard and Performance)
- Power-By-Range Technology (High Power in Range 4)
- Turbocharger and Charge Air Cooler
- Crankcase Ventilation with Filter
- Code Start (Requires Secondary Display)
- Effective Cooling Up to -34°C (-29°F)
- Oil Bathed Undercarriage Disc Brakes, Fully Hydraulic
- Fuel Priming Pump, Automatic
- Variable-Speed Hydraulic Cooling Fan
- Hydrostatic Transmission with Electronic Control
- Drive Modes (Default, TC, Hystat, and Ice)
- Direction Change Aggressiveness Level (Fast, Medium, Slow)
- Rim Pull Control System, Wheel Torque Adjustment
- Extra Slow Speed Control, Ground Speed Setting
- Electric Parking Brake
- Six Fins per Inch Core Density Across Width of Single Radiator Core
- Throttle Lock and Maximum Speed Limiter
-
HYDRAULIC SYSTEM
- Automatic Lift, Tilt, and Lower Kickouts, Cab Adjustable
- Bucket and Fork Modes, Cab Adjustable
- Cylinder Cushioning at Retract and Mechanical Stops
- Precise Control (Fast, Medium, Slow) in Fork Mode
- Hydraulic Response Adjustment (Fast, Medium, Slow)
- Hydraulic Diagnostic Connectors and S·O·S℠ Ports
- Load Sensing Steering and Hydraulic System
-
ELECTRICAL EQUIPMENT
- Extra-Rugged 115A Alternator
- 12V Power Supply in Cab (2)
- 1,000 CCA Batteries (2), 24V System, Battery Disconnect
- Reverse Warning
- Emergency Stop Switch
- Halogen Projectors and Headlamps, LED Tail Lights
- Remote Start Receptacle with Flying Leads
- Main and Critical Function Breakers, Resettable
-
DRIVER'S COMPARTMENT
- 75mm (3 in) Retractable Seat Belt with Audible Alarm and Indicator
- Automatic Temperature Control
- Exterior Mirrors with Convex Lower Section
- Hydraulic Safety Lever
- Interior Lighting, Door, and Ceiling
- Interior Rearview Mirrors (2)
- Lunchbox Storage
- Radio Speaker Pre-Wiring
- Electronic Equipment Controls on Seat, Adjustable
- Multi-Function Controls on Steering Column: Lights, Wipers, Turn Signals
- Telescopic and Tilt Steering Wheel
- Tinted Windshield
-
OTHER STANDARD EQUIPMENT
- Wide Hood Access Doors with Adjustable Opening/Closing Force
- Parallel Lift Loader Linkage
Available Options for 924K
-
OPTIONAL EQUIPMENT
- Integrated Automatic Lubrication System controlled through the second screen
- Auxiliary Flow, Third and Fourth Functions, adjustable via the second screen
- Flashing Beacon
- Deluxe Cab
- Roof-Mounted Front View Camera with separate display*
- Rear Window Defroster (standard in Europe)
- Secondary Display for fine-tuning settings (standard in Europe)
- Front and Rear Sun Visors
- Front and Rear Wiper/Washer with integrated washer fluid
- Rearview Camera (standard in Europe)
- Cold Start Package
- Corrosion Protection Package
- Counterweights (heavy and forestry)
- Quick Coupler (Fusion™ and ISO 23727)
- Debris Packages (low, intermediate, high)
- Front Axle Differential Lock
- Mudguards (extended coverage and full coverage)
- Guards (machine and operator)
- Auxiliary Lights, Halogen or LED with Engine Compartment Illumination
- LED Front Lights
- Load Check Valves
- Object Detection
- Product Link™ PRO and ELITE with features for Push Software Updates, Data Recording, Histograms, and Trend Mapping
- Radio Packages
- Rear Wiper
- Anti-Tip System adjustable through the second screen
- Seats
- Deluxe Seat: Fully Adjustable Air-Suspension Seat, Fabric Upholstery, Mid Backrest, Mechanical Lumbar Support
- Premium Seat: Fully Adjustable Air-Suspension Seat, Leather and Fabric Upholstery, High Backrest, Pneumatic Lumbar Support. Heated and Ventilated Seat Cushion and Backrest.
- Steering
- Two Modes and Auxiliary
- CE Certification (standard in Europe)
- NOTE: Available features may vary by region.
- *Forward-facing camera system may be required to meet local EU requirements.
- For more information, contact your local Cat dealer.
Media Gallery
Discover Similar Equipment
Wheel loaders
950 GC
Net Power - ISO 9249
151 kW
Bucket capacities
2.5 - 4.4 m³
Engine model
C7.1 CAT®
ExploreWheel loaders
990K (steel mill version)
Net Power
521 kW
Operating weight
92,848 kg
Bucket capacities
8.6 - 9.2 m³
ExploreWheel loaders
924K
Maximum Gross Power
105 kW
Operating weight
11,795 kg
Bucket capacities
1.7 - 5.0 m³
ExploreWheel loaders
982
Net Power @ 1,800 rpm - ISO 9249:2007, SAE J1349:2011
282 kW
Operating weight
35,510 kg
Bucket capacity
4.8 - 17.2 m³
Explore