Contact Us
Call Us
Customer Service (Morocco)
Customer Service (International)
Monday to Friday 8am-5:30pm (UTC)
Electric rope shovels 7495 with Hydracrowd technology
Request a QuoteKey Information
Bucket Payload
109 t
Bucket capacity
30,6 - 62,7 m³
Operating weight - with standard bucket and links
1,390,714 kg
Overview
Reliability On The Construction Site
Electric cable shovels have successfully removed overburden and ore in mines worldwide for over a century. Guided by the vision of making these highly productive machines safer, more reliable, and even more productive, we have challenged the current situation and built an even more efficient electric cable shovel.
AdvantagesUp to 15% Reduction in Cost Per Ton
Up to 10% Increased Efficiency
Increased Productivity, Better Profitability
Contact Our Experts
Morocco
International
Monday to Friday 8am-5:30pm (UTC)
Product Specifications for 7495 with Hydracrowd technology
- DIMENSIONS
- Bucket Payload109 t
- Bucket Capacity30.6 to 62.7 m3 (40 to 82 yd3)
- Bucket Payload (up to 109 tonnes [120 tons] upon request)109 t
- NoteDepending on application and material density
- WEIGHT
- Operating Weight, with Bucket and Standard Links1,390,714 kg
- Counterweight (customer-supplied)302,614 kg
- Note (1)These weights vary slightly depending on bucket and selected options
- Note (2)All specifications are based on a 56 m3 (73 yd3) bucket and standard 200.7 cm (79 in) tracks
- MAIN STRUCTURES
- Track Dimensions: Overall Width with 259.1 cm (102 in) Track Shoes11.6 m
- Track Dimensions: Overall Width with Standard 200.7 cm (79 in) Track Shoes11 m
- HoistA planetary gearbox with dual output gears transmits the hoisting torque from the electric motor to the hoist drum.
- Ground Pressure: NoteGround pressure depends on various factors
- Overall Upper Frame Width, Including Standard Walkways12.8 m
- Ground Pressure: Actual Total Ground Contact Area with 259.1 cm (102 in) Track Shoes46.6 m2 (298 kPa); 501.7 ft2 (43 psi)
- RotationTwo planetary gear trains, each driven by a vertically mounted motor, are located on either side of the swing frame. In each gear train, dual-output shaft gears drive the swing rack.
- Planetary DriveDual independent drive motors
- Ground Pressure: Actual Total Ground Contact Area with Standard 200.7 cm (79 in) Track Shoes36 m2 (382 kPa); 386 ft2 (55 psi)
- LUBRICATION SYSTEM
- TypeAutomatic single-line grease and open gear lubrication system
- Components (1)Six pumps (four for open gear lubricant and two for grease) are located in a double-walled, isolated lubrication assembly
- Components (2)Fast fill external at bottom level
- ELECTRICAL CIRCUIT
- Required Power - NoteOther voltages are available to meet customer needs
- DriveAcutrol IGBT Drive System
- Power: 50 Hz6,000 V, 6,600 V, 7,200 V, 11,000 V
- Power: Average Demand945-1322 kW
- Power: VoltageThree-phase, 50/60 Hz, 7,200V
- Power: 60 Hz7,200 V, 13,800 V
- Circuit Voltage (Nominal)50/60 Hz, 7,200 V
- Power: Maximum Power3,778 kW
- FRONT FRAME
- Boom Suspension Cables: Quantity4
- Boom Suspension Cables: Diameter83 mm
- TypeOne-piece, forged seamless tubular bucket and boom tip sheaves equipped with lifting cables and locks to stabilize bucket arm.
- Boom Suspension Cables: NoteHigh-impact-resistant cables available as option
- Bucket Travel Cables: Quantity1
- Hoist Cables: Quantity2
- Hoist Cables: Diameter70 mm
- Bucket Travel Cables: Diameter19 mm
- Crowd (1)The HydraCrowd hydraulic frame is located on the front center section of the revolving frame deck. It powers a large hydraulic cylinder to move the bucket arm forward and backward.
- Crowd (2)Pushbeam (optional). The push mechanism is located on the front center section of the revolving frame. It consists of a motor, brake, drum, and gears. The plastic-impregnated pushbeam cable and lifting cables are used to move the bucket arm forward and backward.
- DIMENSIONS - WORKING RANGES
- Bucket Capacities30.6 to 62.7 m3 (40 to 82 yd3)
- Maximum Dump Height8.8 m
- Bucket Payload109 t
- Operating Weight1,390,714 kg
- APPROXIMATE DIMENSIONS: OPTIMAL WORKING RANGES*
- Maximum Cut Radius24.4 m
- Swing Radius Rear of Revolving Frame9.3 m
- Maximum Cut Height16.3 m
- Horizontal Floor Radius17.1 m
- Dump Height: with Discharge Clearance for Bucket Door Opening8.8 m
- Note (1)Optimal working ranges based on loading a Cat 795F A Haul Truck.
- Note (2)*All specifications are based on a 56 m3 (73 yd3) bucket and standard 200.7 cm (79 in) tracks.
Media Gallery
Discover Similar Equipment
Electric rope shovels
7495 with Hydracrowd technology
Bucket Payload
109 t
Bucket capacity
30,6 - 62,7 m³
Operating weight - with standard bucket and links
1,390,714 kg
ExploreElectric rope shovels
7295
Bucket Payload
45 t
Bucket capacity
19,1 - 38,2 m³
Operating weight - with standard bucket and links
793,259 kg
ExploreElectric rope shovels
7395
Bucket Payload
64 t
Bucket capacity
20,6 - 55,8 m³
Operating weight - with standard bucket and links
1,202,927 kg
ExploreElectric rope shovels
7495 with push-pull cable
Bucket Payload
109 t
Weight*
30,6 - 62,7 m³
Operating weight - with standard bucket and links
1,386,178 kg
Explore