Contact Us
Call Us
Customer Service (Morocco)
Customer Service (International)
Monday to Friday 8am-5:30pm (UTC)
Gas compression engines G3600
Request a QuoteKey Information
Nominal Maximum Characteristics
1499 to 3990 bkW
Emissions
Compliant with NSPS Jobsite Standards
Displacement
127.2 to 339 l
Overview
The G3600 A4 Engines offer a wide range of power to better suit your gas compression application. G3600 A4 Engines provide industry-leading uptime and extended intervals between overhauls. Users with a fleet equipped with G3600 A4 Engines experience minimal unplanned downtime. They also benefit from power tailored to their application, lower operating costs, and assurance of emissions compliance. G3500B Engines are well-suited for centralized gathering, gas processing, transportation and distribution, and storage applications.
Key Features
- Emission Standards
- Lean-Burn Engine Technology
- Ease of Use
- Advanced Digital Engine Management
- Gas Engine Rating Pro
- Over 80 Years of Engine Manufacturing Experience
Emission Standards
Compliant with standards equivalent to the EPA NSPS standards for spark-ignition engines for the year 2010, thanks to an oxidation catalyst.
Lean-Burn Engine Technology
Lean-burn engines operate with large amounts of excess air. The excess air absorbs heat during combustion, reducing combustion temperature and pressure, thus significantly reducing NOx emission levels. The lean-burn design also offers longer component life and optimized fuel consumption
Ease of Use
The engine block's side panels make it easy to inspect internal parts.
Advanced Digital Engine Management
The ADEM A4 engine management system integrates speed control, air/fuel injection limiting, and ignition/detonation controls into a comprehensive engine management system. The ADEM A4 system has been enhanced in terms of user interface, display system, shutdown controls, and system diagnostics
Gas Engine Rating Pro
GERP is a PC program designed to provide exceptional on-site performance for Cat® natural gas engines used in the gas compression sector. The GERP program provides engine site data: altitude, ambient temperature, fuel, engine coolant heat rejection data, performance data, installation drawings, specification sheets, and pump curves
Over 80 Years of Engine Manufacturing Experience
With over 80 years of experience in natural gas engine production, Caterpillar's mastery of these manufacturing processes enables the production of reliable, high-quality products: - Cast engine blocks, cylinder heads, liners, and flywheel housings - Machined critical components - Fully assembled engines
Contact Our Experts
Morocco
International
Monday to Friday 8am-5:30pm (UTC)
Product Specifications for G3600
- ENGINE SPECIFICATIONS
- Maximum Rated Output1499 to 3990 bkW
- EmissionsCompliant with NSPS Jobsite Standards
- Displacement127.2 to 339 liters
- Minimum Rated Output1398 to 3729 bkW
- Compression Ratio9.2:1
- AspirationWith Turbocharger and Inlet Air Cooler
- Flywheel RotationClockwise
- Flywheel Teeth255
- Weight (Dry)16730 to 32659 kg
- Oil Change Interval5000 hours
- Ignition, ProtectionElectronic (ADEM™ A4)
- Stroke300 mm
- Bore300 mm
- FLUID CAPACITIES
- Cooling System470 to 798 liters
- Lubrication Oil Circuit - Fill708 to 1329 liters
Standard Equipment for G3600
-
AIR INTAKE SYSTEM
- Air filter: common usage air intake adapter
-
CONTROL SYSTEM
- A4 control system with integrated electronic regulation function, air/fuel injection limiter, and ignition timing control for each cylinder
- Electrical circuit and instruments certified for hazardous Class I, Division 2, Group D environments. Includes complete ADEM A4 system and optional control panel.
-
COOLING SYSTEM
- Cylinder block cooling circuit pump
- Thermostats and water jackets
- Intake oil cooler/coolant pump
- Intake oil cooler/coolant pump housing and thermostats
- Two-stage intake cooler
- Water jackets heater connections
- Standard ANSI connections
-
EXHAUST SYSTEM
- Dry exhaust manifolds
- Single vertical outlet adapter
- Encapsulated stainless steel insulation
-
FLYWHEELS AND FLYWHEEL HOUSING
- Standard SAE rotation
-
FUEL SYSTEM
- Gas inlet valves with electronic fuel pressure control
-
IGNITION SYSTEM
- A4 control system: detects each cylinder detonation and controls the timing for each cylinder
-
LUBRICATION SYSTEM
- Crankcase breathers (top-mounted)
- Oil cooler
- Oil filter
- Front and rear oil pan drain valves
-
MOUNTING
- Engine mounting feet (six in total)
-
PROTECTION
- Electronic power cutoff system with purging cycle
- Crankcase explosion relief valves
- Gas shut-off valve
-
STARTING SYSTEM
- Pneumatic starting circuit
-
GENERAL
- Paint - Cat Yellow
- Vibration dampers
Available Options for G3600
-
AIR INTAKE SYSTEM
- Heavy-duty air filter with pre-filters
-
CHARGING SYSTEM
- CSA-approved 35 A and 65 A charging alternators
-
EXHAUST SYSTEM
- Flexible bellows adapters
- Exhaust regulator
- Welded flanges
-
FUEL SYSTEM
- Fuel filter
- Gas pressure regulator
- Flexible fitting
-
INSTRUMENTS
- LCD display panel
- Remote data monitoring and speed control
- Color HMI display
- Compatible with Cat® electronic equipment and Data View
- Modbus and Ethernet compatible
-
LUBRICATION SYSTEM
- Pneumatic or electric motorized pre-lubrication
- Double oil filter
- Right-hand maintenance
- Lubrication oil auxiliary circuit
-
MOUNTING
- Mounting plates (set of four)
- Additional mounting feet (set of two)
- Additional mounting plates (set of two)
-
POWER TAKE-OFFS
- Front power take-off shafts
-
STARTING SYSTEM
- Air pressure relief valve
-
GENERAL
- Engine turning device
- Shock absorber protection
Available Models
- G3606
- Maximum Rated Output1499 bkW
- Displacement127.2 l
- Minimum Rated Output1398 bkW
- Dry Weight16730 kg
- Cooling Circuit470 l
- Lubrication Oil Circuit - Fill708 l
- G3608
- Maximum Rated Output1995 bkW
- Displacement169.6 l
- Minimum Rated Output1864 bkW
- Dry Weight21092 kg
- Cooling Circuit530 l
- Lubrication Oil Circuit - Fill912 l
- G3612
- Maximum Rated Output2983 bkW
- Displacement254 l
- Minimum Rated Output2796 bkW
- Dry Weight26535 kg
- Cooling Circuit734 l
- Lubrication Oil Circuit - Fill1030 l
- G3616
- Maximum Rated Output3990 bkW
- Displacement339 l
- Minimum Rated Output3729 bkW
- Dry Weight32659 kg
- Cooling Circuit798 l
- Lubrication Oil Circuit - Fill1329 l
Media Gallery
Discover Similar Equipment
Gas compression engines
G3508
Maximum Nominal Output
500 bkW
Minimum Nominal Output
391 bkW
Emissions
Compliant with NSPS or Unregulated Construction Standards
ExploreGas compression engines
G3600
Nominal Maximum Characteristics
1499 to 3990 bkW
Emissions
Compliant with NSPS Jobsite Standards
Displacement
127.2 to 339 l
ExploreGas compression engines
CN5086
Voltage/Frequency
4,000 V ± 10%/60 Hz
Ex Protection Type
Class 1, Division 2, Group A, B, C, D T3 (NEC or CEC)
Type of Electric Motor
Squirrel-Cage Induction Motor
ExploreGas compression engines
CN1566
Voltage/Frequency
4 000 V ± 10 %/60 Hz
Type of Protection Ex
Class 1, Division 2, Groups A, B, C, D T3 (NEC or CEC)
Mounting Type
F1 or F2
Explore